Ductmate Press-On Bull Nosing is universal and can be used on DM Flange and T.D.C / T.D.F systems a fast and effective means to reduce fibers within the air stream.
Acoustical Vane was specifically designed for projects that demand quiet operating systems. This vane provides an easy means for the construction of consistent double wall turning vane systems. Turning vane systems aid in directing air around mitered elbows. The ECONOrail® is a simple means for securing vane for the purpose of directing air around mitered elbows. Other products available in items.
Designed to isolate equipment noise and vibration from the ductwork, PROflex flexible duct connector consists of a fabric which is secured to sheet metal on both sides. Typically the connector is inserted between the equipment and the ductwork.
The ECONOflange round duct connector was designed as an alternative to Ductmate's proprietary round self-sealing system, Spiralmate. The user friendly design paired with its excellent performance makes ECONOflange the most cost-effective round flange connection on the market.
The single or double bolt Quick-sleeve provides a simple, leak-free connection for round ducts used in air-conditioning, ventilation and dust collection systems.
Designed as a way to efficiently turn a straight run of duct. GSI elbows are available in two styles, 45 and 90 degree to accommodate multiple installation needs. Yellow Union Label manufacturing is standard on these products
Manufactured with an integral one-inch flange and peel and stick gasket, our press-on conical duct fitting installs easily without the need of external sealing.
A simple and easy-to-use connection between two straight duct runs. The 8" also provides the option to add a damper for additional system air balancing.
GSI″s factory sealed take-off for round duct. Manufactured with a curved one-inch flange and peel and stick gasket, our saddle tap duct fitting installs easily on round duct without the need of external sealing.
When moisture collection is a problem in ductwork or drain pans, the Ductmate Moisture Drain is an economical and fast way of installing a leak-proof drain.
ProGuard is designed to be placed over the opening of the ductwork during storage and transportation to protect the inside of ductwork from dust, dirt and other particles that can lead to poor indoor air quality.
Full blast gates (also called cut-offs) are used to open and close branch ducts in a system allowing air to be diverted only to machines that are operating, thus conserving air volume.
Sandwich Access Doors provide easy access into air ducts and units. This door was developed to provide a solid, well-insulated, leak proof door that is simple to install.
Sandwich Access Doors provide easy access into air ducts and units. This door was developed to provide a solid, leak proof door that is simple to install.
Designed for duct cleaners to provide easy access into air ducts and units. Available in 8″, 10″, and 12″. Hole size is perfect fit to secure metal adapter that holds the vacuum hose.
This door was designed specifically for hospitals, clean rooms, pharmaceuticals, and laboratories to eliminate danger of dust contaminating ductwork while inspecting in-duct smoke detectors, UVC emitters, fire and smoke dampers, and humidifiers.
Ultimate Round Door™ is specifically designed for use in round grease duct. Manufactured to exact diameter tolerances to insure a tight seal. This door was designed for applications requiring UL 1978 listing.
Square Framed Access Doors provide easy access into air ducts and units. This door was developed as an inexpensive alternative to the Ductmate Sandwich® Access Door, for low pressure applications.
PROseal®, EVERseal™, EZseal™, and FIBERseal® are Ductmate's premium quality water-based duct sealants for varied industrial, commercial, and residential applications.
Gecko Glue™ Gold and Silver are used to bond duct liner insulation to galvanized duct work - Ductmate PolyArmor™ or fiberglass insulation, seal cut edges of fiberglass insulation, bond kraft-backed foil covering to fiberglass, and bond multiple layers of fibrous insulation board.
Coming Soon, Ductmate will be transitioning solvent based products into a better adhesive to better meet your needs.
Existing inventory will be available until end of 2020. Call or email DCL Supply for more information.
QuickStick™ WB is a water-based and quick tack single application duct liner adhesive designed to bond all forms of HVAC insulations (fiberglass, polyester, and elastomeric). Providing industry leading coverage (2x that of solvent based duct liner adhesives) while maintaining a high level of tack and a long lasting bond.
5511M was developed to provide an airtight, watertight, flexible seal for metal-to-metal concealed joints. As a non-skinning, non-drying mastic, 5511M has been specifically formulated for precise application to panel joints at the roll forming line.
High quality sealing tape for use with Ductmate's 4-bolt connection systems. Also suitable for use with other rectangular flange systems which require gasket.
Ductmate PolyArmor is a polyester duct liner to be used in forced air heating, ventilating, and air conditioning systems. It is engineered to provide industry leading R-values with excellent noise reduction values and superior indoor air quality.
Ductmate Weld Pins are used to permanently secure insulation to the inside of sheet metal ductwork. Designed to work with all the standard resistance welding equipment.
Gripnail's Insulation Hanger easily install any type of insulation up to 3.5" thick to air ducts, metal buildings, concrete foundations - even to the underside of wooden roofs.
These customized vise grips work in conjunction with Ductmate's Spiralmate system to quickly align mating duct sections, reducing time manpower and cost.
Offset Left & Right Aviation Snips flow material away from blades and position user's hand above material for best maneuverability cutting full sheets or tight curves.